Cable tray machine price
Cable tray roll forming machine for sale
Equipment for cable tray width 40-100mm Price :USD135000 CIF (3-4 size)
Equipment for 100-600 :USD180000 CIF (3-4 size)
1. Cable Tray production equipment summary
This production line be used to produce cable tray . through exchange punching mould to finish producing different specifications. One set of roller can make all specifications of cable tray. adjusting the width of roller to finish the change of specifications.
2.Cable Tray Machine Working flow :
De-coiler — leveling
— feeding — punching — conveying table — roll forming — finished product
3. Cable tray production equipment consists
The
equipment consist with de-coiler , leveling machine, servo feeding
machine, the
punching machine (with punching moulds ),automatic conveying table , main
forming machine, cutting device, collection table .PLC control system
4. Main technical parameter of production line :
material :
GI steel sheet, low carbon steel.
the
thickness of the steel sheet : 0.8-2.0mm
inner
diameter of coil : Φ508mm
line speed:
4-6m/min ( adjustable)
5. The characteristic of the machine
5.1 Automatic de-coiler :
F type : cantilever drumming type
F functional and structural features:
be used to support and expansion steel
coiler , section steel welding fuselage. it is easy to operate.
F
technical parameters
material inner diameter : φ508mm
range of inner diameter : ф450-550
maximum outer diameter: φ1200mm
load capacity: ≤ 5T
5.2 Leveling machine :
F type : nine rollers active leveling machine
F functional
and structural characteristics: leveling steel strip. Consist of pinch roller
and leveling rollers, pinch rollers can be individually adjusted, upper
leveling roller adopt overall structure, and establish two adjustment points on
before and after, to form a certain angle, easy to improve the quality of
leveling .
leveling
roll is GCr15 high-frequency hardening, the hardness can reach HRC45-55.
F technical parameters:
the number
of leveling rollers: 9 rolls (up4/down5),
2 pinch rolls
motor power:
5.5KW
5.3 Correcting table
F type : roller supporting , correcting
F
functions and Structure: correcting
and with steel. Correcting device mainly consists of a pneumatic Prime bridge,
roller, vertical roll-oriented composition. Guide wheels can be easily to
adjust to different width. Galvanized rollers is beautiful and flexible.
5.4 Servo feeding machine
F type : servo feeding
F functions and Structure: Pinch and be with
steel to the press machine. Polyurethane roller ensure that the feeding force.
Feeding each error of feeding be
controlled in rang of ± 0.15mm. Compared with the servo Clamp, feed length
setting is more flexible, adapt to a wider range. This feeding device is more
suitable for wide material , can effectively improve the feeding accuracy.
Servo motor, measuring devices, digital control system are the imported
components.
F technical parameters:
maximum
number of feeding: 30 ~ 40 times / min (adjustable)
feeding
step: 100MM / step (adjustable).
5.5 Punching machine :
F type : 21-200,
2000KN press machine ,friction clutch, PLC control, high productivity.
has good rigidity of equipment, die has a long life.
F function and structure: body adopt the whole
steel welded structure, high stiffness, and reasonable structure, beautiful
appearance. vertical crankshaft placement, fulcrum distance is short,
crankshaft stiffness. gear be enclosed within the fuselage, speed motors,
variable speed within a certain range, expanding the scope of the process. Adopt
combined rigid chain of dry air friction clutch - brakes, the friction disc use
high-tech products - semi-metallic friction materials, heat resistance, wear
resistance reached a high level, the greater torque transfer , the driven
inertia is small, easy installation and maintenance.
slider is a
cast box structure, the slider overload protection device is installed to
protect the sensitive and reliable, when the slide overload, the fuse voltage
collapse destroyed, and send a signal, the slider is stopped, thereby
protecting the machine tool and die from damage.
slider
closed Height adopt motorized adjustment, digital display, the reading accuracy
of 0.10 mm.
F technical parameters:
the column
spacing ≥ 960mm
nominal
pressure: 2000KN
bominal stroke:
6mm
trips: 30 ~
40rpm
motor power:
30KW
dimension:
2730x1640x3740mm
5.6 Punching
mould
function and
structure: 100MM / step, 40 steps / min to the beat of the Progressive complete
punching and beading. mold use internal and external guiding structures; a
large mold with separate small mold, punching, beading is be done step by step,
can complete conversion between the slot (no pore pressure bars) and disc
(punching beading).Both sides of the connection hole can be washed into
through-hole and can knock down holes,
mold
material: Cr12
5.7 cutting
F type: PLC control cutting length without
waste.
F functions and Structure: fixed-length steel
after punching. cutting device is on the end of the die feed direction, length
is step.
cutting
after punching , including cutting off mold.
5.8 Automatic conveying table
F type: chain drive drum transfer machines.
F function and structure: sheet be conveyed to
roll forming machine after punching press and cutting. Consist of roller, motor
reducer, welded steel frame and other components. both sides have adjustable
guide panels, with the passive pressure wheel.
F technical parameters:
transport
material width: mm
maximum
length of material : 8000mm
5.9 Feed conveyor frame
5.9 Feed conveyor frame
F type: roll type (Adjustable)
F
function and structure: after
correcting , punching , cutting , the sheet metal be conveyed smoothly into the
roll forming machine. correcting device Mainly consist of level roller, guide
stand wheel composition. Guide wheel can easily adjust to suit different widths
of sheet metal.
5.10 Forming machine :
F type:
double cantilever gear drive, width adjustable universal forming machine and
the overall mobile, fast (waist height and width) exchange specifications.
F function and structure: sheet metal is rolled
form by 20 stand rolls, gradually into finished cable tray. Consist of the
speed AC motor, reducer, high-precision linear guides, left and right gear box,
lateral adjustment mechanism, the roller group composition. A set of rollers to
complete all the specifications of the cable tray, adjusting the position of
roller frame to achieve replacement of specification .
F technical parameters:
the number
of horizontal roll stand: about 20
machine
shaft: (specifically adjusted according to actual situation)
the level of
roller distance: about 350-550mm
motor power:
22.5KW
line speed:
10-15m/min
5.11 Collection table
F type: Finished cable tray arrive collection
table, worker will collect products , non-powered roller.
F function and structure: consist of section
steel (square pipe), no power roller assembly, welding, play a role in
supporting finished product ,can adapt 8-meter finished product.
5.12 Electrical control system
the whole line adopt imported PLC control , touch screen be used for
human-machine interface, achieving the
interaction between man and PLC.
Good cable tray machine
ReplyDeleteThank you very much for your comments.
DeleteVery expensive
ReplyDeleteHi, yes, we can discuss.
DeleteThis cable tray roll forming machine seems many years ago making method.
ReplyDeleteIs there anyone who can recommend the best product among the ones listed here?https://www.guangduanpresses.com/product/detail/four-column-double-action-hydraulic-press-machine-ya28-series.html
ReplyDelete