Network Cabinet Nine Fold Pofiles Components Manufacturer

Rack Enclosure Network Cabinet Components 9 Fold Frame Profiles.

1. The frame of the box is made of 9-fold profiles, and the high-quality special tee is welded into a whole, which has a firm and reliable structure and a beautiful appearance.

Iron Tee Connect Corner

2. The lower edge of the door panel is about 25mm from the ground. The long box fixed on the door panel is equipped with circular holes every 25mm, which not only strengthens the strength of the door panel, but also can be used to install components such as wire harnesses and electrical appliances.

3. The mounting plate can be moved back and forth with a distance of 25mm to adjust the depth

4.Each 25mm in 9 fold profile is provided with round holes and square holes (for use with installation) every 25mm, which makes the internal installation and fixing of the instrument very convenient and fast.

T Bar Connect 9 Fold Rack

5.The top cover, side plate, back plate and bottom plate are fixed with screw fasteners, which is easy to disassemble and install in the cabinet.

6. Fully automatic 9 fold rack equipment processing, plus three-point locking of fork lock, middle and lower, to ensure the cabinet is sealed, protection grade IP55

7. The three cover plates of the cable entry holes on the bottom plate can be replaced with each other and move freely to facilitate the introduction of cables.

8. The base is easy to install and remove (optional), international quality cabinet replaceable accessories

9.Can be customized according to customer specifications

Nine Profile Post Surface treatment:
Degreasing, pickling, phosphating, electrophoretic primer, electrostatic spraying; or stainless steel wire drawing

Material:

High-quality cold-rolled steel plate, door thickness 2.0mm, box thickness 1.5mm, mounting plate 2.5mm

Nine Fold Profiles can be made by galvanized steel, Stainless Steel or Cold Plate.

Galvanized Steel 9 Fold Profiles

https://www.superdamc.com